Distance Ospf (Ospfv); Enable (Ospfv) - NETGEAR ProSafe GSM7224P User Manual

no default-metric (OSPFv3)
This command is used to set a default for the metric of distributed routes.
Format
no default-metric
Mode
Router OSPFv3 Config
distance ospf (OSPFv3)
This command sets the route preference value of OSPF route types in the router. Lower
route preference values are preferred when determining the best route. The type of OSPF
route can be intra, inter, or external. All the external type routes are given the same
preference value. The range of <preference> value is 1 to 255.
Default
110
Format
distance ospf {intra-area <1-255> | inter-area <1-255> | external
<1-255>}
Mode
Router OSPFv3 Config
no distance ospf(OSPFv3)
This command sets the default route preference value of OSPF routes in the router. The type
of OSPF route can be intra, inter, or external. All the external type routes are given the same
preference value.
Format
no distance ospf {intra-area | inter-area | external}
Mode
Router OSPFv3 Config
enable (OSPFv3)
This command resets the default administrative mode of OSPF in the router (active).
Default
enabled
Format
enable
Mode
Router OSPFv3 Config
no enable (OSPFv3)
This command sets the administrative mode of OSPF in the router to inactive.
Format
no enable
Mode
Router OSPFv3 Config
ProSafe Managed Switch
IPv6 Commands
389