NETGEAR ProSafe GSM7224P User Manual page 697

no max-bandwidth-down
Use this command to reset the maximum rate to the default.
Format
no max-bandwidth-down
Mode
Captive Portal Instance mode
max-bandwidth-up
Use this command to configure the maximum rate at which a client can send data into the
network. The rate is
Default
0
Format
max-bandwidth-up <0-536870911>
Mode
Captive Portal Instance mode
no max-bandwidth-up
Use this command to reset the maximum rate to the default
Format
no max-bandwidth-up
Mode
Captive Portal Instance mode
max-input-octets
Use this command to configure the maximum number of octets the user is allowed to
transmit. After this limit has been reached the user will be disconnected. The number of
octets is in bytes. 0 indicates limit not enforced.
Default
0
Format
max-input-octets
Mode
Captive Portal Instance mode
no max-input-octets
Use this command to reset the limit to the default.
Format
no max-input-octets
Mode
Captive Portal Instance mode
ProSafe Managed Switch
in bits per seconds. 0 indicates limit not enforced.
<0-4294967295>
Captive Portal Commands
697
.