Show Lldp Statistics - NETGEAR ProSafe GSM7224P User Manual

Term Definition
Interface
The interface in a unit/slot/port format.
Link
Shows whether the link is up or down.
Transmit
Shows whether the interface transmits LLDPDUs.
Receive
Shows whether the interface receives LLDPDUs.
Notify
Shows whether the interface sends remote data change notifications.
TLVs
Shows whether the interface sends optional TLVs in the LLDPDUs. The TLV codes can
be 0 (Port Description), 1 (System Name), 2 (System Description), or 3 (System
Capability).
Mgmt
Shows whether the interface transmits system management address information in the
LLDPDUs.

show lldp statistics

Use this command to display the current LLDP traffic and remote table statistics for a specific
interface or for all interfaces.
Format
show lldp statistics {<unit/slot/port> | all}
Mode
Privileged Exec
Term Definition
Last Update
The amount of time since the last update to the remote table in days, hours, minutes, and
seconds.
Total Inserts
Total number of inserts to the remote data table.
Total Deletes
Total number of deletes from the remote data table.
Total Drops
Total number of times the complete remote data received was not inserted due to
insufficient resources.
Total Ageouts
Total number of times a complete remote data entry was deleted because the Time to
Live interval expired.
The table contains the following column headings:
Term Definition
Interface
The interface in unit/slot/port format.
Transmit Total
Total number of LLDP packets transmitted on the port.
Receive Total
Total number of LLDP packets received on the port.
Discards
Total number of LLDP frames discarded on the port for any reason.
Errors
The number of invalid LLDP frames received on the port.
ProSafe Managed Switch
Switching Commands
190