Show Mail-Server Config - NETGEAR ProSafe GSM7224P User Manual

Port
Use this command to configure the TCP port to use for communication with the SMTP server.
The recommended port for TLSv1 is 465, and for no security (i.e. none) it is 25. However, any
nonstandard port in the range 1 to 65535 is also allowed.
Default
25
Format
port {465 | 25 | 1–65535}
Mode
Mail Server Config
Username
Use this command to configure the login ID that the switch uses to authenticate with the
SMTP server.
Default
admin
Format
username name
Mode
Mail Server Config
Password
Use this command to configure the password that the switch uses to authenticate with the
SMTP server.
Format
password password
Mode
Mail Server Config

show mail-server config

Use this command to display information about the email alert configuration.
Format
show mail-server {ip-address | hostname | all } config
Mode
Privileged EXEC
Term Definition
No of mail
The number of SMTP servers configured on the switch.
servers
configured
Email Alert Mail
The IPv4/IPv6 address or DNS hostname of the configured SMTP server.
Server Address
Email Alert Mail
The TCP port the switch uses to send email to the SMTP server.
Server Port
Email Alert
The security protocol (TLS or none) the switch uses to authenticate with the SMTP
Security
server.
Protocol
ProSafe Managed Switch
Utility Commands
526