Ipv6 Pim Bsr-Border; Ipv6 Pim Bsr-Candidate - NETGEAR ProSafe GSM7224P User Manual

Term Definition
Hello Interval
Hello interval value. The frequency at which PIM hello messages are transmitted on
this interface. By default, the value is 30 seconds.
Join-prune Interval Join-prune interval value.
DR Priority
DR priority configured on this interface. This is not applicable if the interface mode is
Dense.
BSR Border
Indicates whether the interface is configured as a BSR border.
Neighbor Count
Number of PIM neighbors discovered on the interface. This field is displayed only
when the interface is operational.
Designated-Router IP address of the elected DR on the interface. This field is displayed only when the
interface is operational.
(Switch) #show ipv6 pim interface 1/0/1
Interface...................................... 1/0/1
Mode........................................... Dense
Hello Interval (secs).......................... 30
Join Prune Interval (secs)..................... 60
DR Priority.................................... 1
BSR Border..................................... Disabled

ipv6 pim bsr-border

Use this command to prevent bootstrap router (BSR) messages from being sent or received
through an interface.
Default
disabled
Format
ipv6 pim bsr-border
Mode
Interface Config
no ipv6 pim bsr-border
Use this command to disable the interface from being the BSR border.
Format
no ipv6 pim bsr-border
Mode
Interface Config

ipv6 pim bsr-candidate

Use this command to configure the router to announce its candidacy as a bootstrap router
(BSR).
Default
None
ProSafe Managed Switch
IPv6 Multicast Commands
423