•
show version
•
show sysinfo
•
show port all
•
show isdp neighbors
•
show logging
•
show event log
•
show logging buffered
•
show trap log
Format
show tech-support
Mode
Privileged EXEC
terminal length
Use this command to set the number of lines of output to be displayed on the screen, i.e.
pagination, for the show running-config and show running-config all commands.
The terminal length size is either zero or a number in the range of 5 to 48. After the
user-configured number of lines is displayed in one page, the system prompts the user
"--More-- or (q)uit." Press q or Q to quit, or press any key to display the next set
of <5-48> lines. The command terminal length 0 disables pagination and, as a result,
the output of the show running-config command is displayed immediately.
Default
24 lines per page
Format
terminal length <0|5-48>
Mode
Privileged EXEC
no terminal length
Use this command to set the terminal length to the default value.
Format
no terminal length
Mode
Privileged EXEC
show terminal length
Use this command to display the value of the user-configured terminal length size.
Format
show terminal length
Mode
Privileged EXEC
ProSafe Managed Switch
Utility Commands
515