enable (RIP)
This command resets the default administrative mode of RIP in the router (active).
Default
enabled
Format
enable
Mode
Router RIP Config
no enable (RIP)
This command sets the administrative mode of RIP in the router to inactive.
Format
no enable
Mode
Router RIP Config
ip rip
This command enables RIP on a router interface.
Default
disabled
Format
ip rip
Mode
Interface Config
no ip rip
This command disables RIP on a router interface.
Format
no ip rip
Mode
Interface Config
auto-summary
This command enables the RIP auto-summarization mode.
Default
disabled
Format
auto-summary
Mode
Router RIP Config
no auto-summary
This command disables the RIP auto-summarization mode.
Format
no auto-summary
Mode
Router RIP Config
ProSafe Managed Switch
Routing Commands
309