Show Ip Arp Inspection Statistics - NETGEAR ProSafe GSM7224P User Manual

the given VLAN list. The global configuration includes the source mac validation,
destination mac validation and invalid IP validation information.
Format
show ip arp inspection [vlan <vlan-list>]
Mode
• Privileged EXEC
• User EXEC
Term Definition
Source MAC
Displays whether Source MAC Validation of ARP frame is enabled or disabled.
Validation
Destination
Displays whether Destination MAC Validation is enabled or disabled.
MAC Validation
IP Address
Displays whether IP Address Validation is enabled or disabled.
Validation
VLAN
The VLAN ID for each displayed row.
Configuration
Displays whether DAI is enabled or disabled on the VLAN.
Log Invalid
Displays whether logging of invalid ARP packets is enabled on the VLAN.
ACL Name
The ARP ACL Name, if configured on the VLAN.
Static Flag
If the ARP ACL is configured static on the VLAN.
Example: The following shows example CLI display output for the command.
(Switch) #show ip arp inspection vlan 10-12
Source Mac Validation
Destination Mac Validation : Disabled
IP Address Validation
Vlan Configuration
---- -------------
10
11
12

show ip arp inspection statistics

Use this command to display the statistics of the ARP packets processed by Dynamic ARP
Inspection. Give the vlan-list argument and the command displays the statistics on all
DAI-enabled VLANs in that list. Give the single vlan argument and the command displays the
statistics on that VLAN. If no argument is included, the command lists a summary of the
forwarded and dropped ARP packets.
Format
show ip arp inspection statistics [vlan vlan-list]
Mode
• Privileged EXEC
• User EXEC
ProSafe Managed Switch
: Disabled
: Disabled
Log Invalid
-----------
Enabled Enabled
Disabled Enabled
Enabled Disabled
Switching Commands
ACL Name Static flag
--------- ----------
H2 Enabled
158