Area Virtual-Link Dead-Interval (Ospf); Area Virtual-Link Hello-Interval (Ospf) - NETGEAR ProSafe GSM7224P User Manual

specified. The default value for authentication type is none. Neither the default password key
nor the default key id are configured.
Default
none
Format
area <areaid> virtual-link <neighbor> authentication {none | {simple
<key>} | {encrypt <key> <keyid>}}
Mode
Router OSPF Config
no area virtual-link authentication
This command configures the default authentication type for the OSPF virtual interface
identified by <areaid> and <neighbor>. The <neighbor> parameter is the Router ID of
the neighbor.
Format
no area <areaid> virtual-link <neighbor> authentication
Mode
Router OSPF Config

area virtual-link dead-interval (OSPF)

This command configures the dead interval for the OSPF virtual interface on the virtual
interface identified by <areaid> and <neighbor>. The <neighbor> parameter is the
Router ID of the neighbor. The range for seconds is 1 to 65535.
Default
40
Format
area <areaid> virtual-link <neighbor> dead-interval <seconds>
Mode
Router OSPF Config
no area virtual-link dead-interval
This command configures the default dead interval for the OSPF virtual interface on the
virtual interface identified by <areaid> and <neighbor>. The <neighbor> parameter is
the Router ID of the neighbor.
Format
no area <areaid> virtual-link <neighbor> dead-interval
Mode
Router OSPF Config

area virtual-link hello-interval (OSPF)

This command configures the hello interval for the OSPF virtual interface on the virtual
interface identified by <areaid> and <neighbor>. The <neighbor> parameter is the
Router ID of the neighbor. The range for <seconds> is 1 to 65535.
Default
10
Format
area <areaid> virtual-link <neighbor> hello-interval <1-65535>
Mode
Router OSPF Config
ProSafe Managed Switch
Routing Commands
275