set igmp querier query-interval
Use this command to set the IGMP Querier Query Interval time. It is the amount of time in
seconds that the switch waits before sending another general query.
Default
disabled
Format
set igmp querier query-interval <1-18000>
Mode
Global Config
no set igmp querier query-interval
Use this command to set the IGMP Querier Query Interval time to its default value.
Format
no set igmp querier query-interval
Mode
Global Config
set igmp querier timer expiry
Use this command to set the IGMP Querier timer expiration period. It is the time period that
the switch remains in Non-Querier mode once it has discovered that there is a Multicast
Querier in the network.
Default
60 seconds
Format
set igmp querier timer expiry <60-300>
Mode
Global Config
no set igmp querier timer expiry
Use this command to set the IGMP Querier timer expiration period to its default value.
Format
no set igmp querier timer expiry
Mode
Global Config
set igmp querier version
Use this command to set the IGMP version of the query that the snooping switch is going to
send periodically.
Default
1
Format
set igmp querier version <1-2>
Mode
Global Config
ProSafe Managed Switch
Switching Commands
170