no llpf
Use this command to unblock LLPF protocol(s) on a port.
show llpf interface all
Use this command to display the status of LLPF rules configured on a particular port or on all
ports.
Format
show llpf interface [all | unit/slot/port]
Mode
Privileged EXEC
Term
Definition
Block ISDP
Shows whether the port blocks ISDP PDUs.
Block VTP
Shows whether the port blocks VTP PDUs.
Block DTP
Shows whether the port blocks DTP PDUs.
Block UDLD
Shows whether the port blocks UDLD PDUs.
Block PAGP
Shows whether the port blocks PAGP PDUs.
Block SSTP
Shows whether the port blocks SSTP PDUs.
Block All
Shows whether the port blocks all proprietary PDUs available for the LLDP feature.
ProSafe Managed Switch
Utility Commands
587