Packet Capture Commands; Capture Transmit Packet; Capture Receive Packet; Capture All Packets - NETGEAR ProSafe GSM7224P User Manual

Packet Capture Commands

Packet capture commands assist in troubleshooting protocol-related problems with the
management CPU. The packets to and from the management CPU can be captured in an
internally allocated buffer area for export to a PC host for protocol analysis. Public domain
packet analysis tools like Ethereal can be used to decode and review the packets in detail.
Capturing can be performed in a variety of modes, either transmit-side only, receive-side only,
or both. The number of packets captured will depend on the size of the captured packets.

capture transmit packet

This command enables the capturing of transmit packets.
Format
capture transmit packet
Mode
Global Config
no capture transmit packet
This command disables the capturing of transmit packets.
Format
no capture transmit packet
Mode
Global Config

capture receive packet

This command enables the capturing of receive packets.
Format
capture receive packet
Mode
Global Config
no capture receive packet
This command disables the capturing of receive packets.
Format
no capture receive packet
Mode
Global Config

capture all packets

This command enables the capturing of receive packets.
Format
capture all packet
Mode
Global Config
ProSafe Managed Switch
Utility Commands
560