no nsfrestart-interval
Use this command to revert the grace period to its default value.
Format
no [ietf] nsf restart-interval
Modes
OSPF Router Configuration
nsf helper
Use this command to enable helpful neighbor functionality for the OSPF protocol. You can
enable this functionality for planned or unplanned restarts, or both.
Default
OSPF may act as a helpful neighbor for both planned and unplanned restarts
Format
nsf [ietf] helper [planned-only]
Modes
OSPF Router Configuration
Parameter
Description
ietf
This keyword is accepted but not required.
planned-only
This optional keyword indicates that OSPF should only help a restarting router
performing a planned restart.
no nsf helper
Use this command to disable helpful neighbor functionality for OSPF.
Format
no nsf [ietf] helper
Modes
OSPF Router Configuration
nsf helper disable
Use this command to disable helpful neighbor functionality for OSPF.
Note:
The commands no nsf helper and nsf ietf helper disable
are functionally equivalent. The command nsf ietf helper
disable is supported solely for compatibility with other network
software CLI.
Format
nsf [ietf] helper disable
Modes
OSPF Router Configuration
ProSafe Managed Switch
Routing Commands
307