Version; Num Of Multicast Groups; Unsolicited Report Interval; Querier Ip Address On Proxy Interface - NETGEAR ProSafe GSM7224P User Manual

show ipv6 mld-proxy

Use this command to display a summary of the host interface status parameters.
Format
show ipv6 mld-proxy
Mode
• Privileged EXEC
• User EXEC
The command displays the following parameters only when you enable MLD-Proxy.
Field
Interface Index
Admin Mode
Operational Mode

Version

Number of Multicast Groups

Unsolicited Report Interval

Querier IP Address on Proxy
Interface
Older Version 1 Querier
Timeout

Proxy Start Frequency

Example: The following shows example CLI display output for the command.
(Switch) #show ipv6 mld-proxy
Interface Index............................................. 1/0/3
Admin Mode................................................ Enable
Operational Mode......................................... Enable
Version......................................................... 3

Num of Multicast Groups............................. 0

Unsolicited Report Interval.......................... 1
Querier IP Address on Proxy Interface........ fe80::1:2:5

Older Version 1 Querier Timeout................ 00:00:00

Proxy Start Frequency.................................
ProSafe Managed Switch
Description
The interface number of the MLD-Proxy.
Indicates whether MLD-Proxy is enabled or disabled. This is a configured
value.
Indicates whether MLD-Proxy is operationally enabled or disabled. This is a
status parameter.
The present MLD host version that is operational on the proxy interface.
The number of multicast groups that are associated with the MLD-Proxy
interface.
The time interval at which the MLD-Proxy interface sends unsolicited group
membership report.
The IP address of the Querier, if any, in the network attached to the
upstream interface (MLD-Proxy interface).
The interval used to timeout the older version 1 queriers.
The number of times the MLD-Proxy has been stopped and started.
IPv6 Multicast Commands
436