Ip Irdp Minadvertinterval; Ip Irdp Preference; Show Ip Irdp - NETGEAR ProSafe GSM7224P User Manual

Prosafe managed switch command line interface (cli) 9.0.2
Hide thumbs Also See for ProSafe GSM7224P:
Table of Contents

Advertisement

ip irdp minadvertinterval

This command configures the minimum time, in seconds, allowed between sending router
advertisements from the interface. The range for minadvertinterval is three to the value of
maxadvertinterval.
Default
0.75 * maxadvertinterval
Format
ip irdp minadvertinterval <3-maxadvertinterval>
Mode
Interface Config
no ip irdp minadvertinterval
This command sets the default minimum time to the default.
Format
no ip irdp minadvertinterval
Mode
Interface Config

ip irdp preference

This command configures the preferability of the address as a default router address, relative
to other router addresses on the same subnet.
Default
0
Format
ip irdp preference <-2147483648 to 2147483647>
Mode
Interface Config
no ip irdp preference
This command configures the default preferability of the address as a default router address,
relative to other router addresses on the same subnet.
Format
no ip irdp preference
Mode
Interface Config

show ip irdp

This command displays the router discovery information for all interfaces, or a specified
interface.
Format
show ip irdp {<unit/slot/port> | all}
Modes
• Privileged EXEC
• User EXEC
ProSafe Managed Switch
Routing Commands
252

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents