OSPF Configuration
The config commands used in the following example enable OSPF on ports 0.1 and 0.2
Table 6-11.
OSPF Configuration Example
OSPF
config routing enable
config interface routing 0.1 enable
config interface routing 0.2 enable
config router id 192.150.2.1
config router ospf interface areaid 0.1 0.0.0.0
config router ospf interface areaid 0.2 0.0.0.0
config ip interface create 0.1 192.150.2.1 255.255.255.0
config ip interface create 0.2 192.150.3.1 255.255.255.0
config router ospf adminmode enable
config router ospf interface mode 0.1 enable
config router ospf interface mode 0.2 enable
VLAN Routing
This section provides examples of VLAN Routing for RIP and OSPF.
RIP Configuration
This example creates two router ports to run RIP 2.
Quick Startup
7000 Series L3 Managed Switch Reference Manual for Software v1.0
May 30, 2003 Beta Draft
6-9