Arp Retries; Arp Timeout; Clear Arp-Cache - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

14.1.7 arp retries

This command configures the ARP count of maximum request for retries. The value for
is an integer, which represents the maximum number of request for retries. The
<retries>
range for
<retries>
Default
Format
Mode
14.1.7.1 no arp retries
This command configures the default ARP count of maximum request for retries.
Format
Mode

14.1.8 arp timeout

This command configures the ARP entry ageout time. The value for
positive integer, which represents the IP ARP entry ageout time in seconds. The range for
is between 15-21600 seconds.
<seconds>
Default
Format
Mode
14.1.8.1 no arp timeout
This command configures the default ARP entry ageout time.
Format
Mode

14.1.9 clear arp-cache

This command causes all ARP entries of type dynamic to be removed from the ARP
cache. If the gateway parameter is specified, the dynamic entries of type gateway are
purged as well.
Format
Mode
14-4
is an integer between 0-10 retries.
4
arp retries <0-10>
Global Config
no arp retries
Global Config
1200
arp timeout <15-21600>
Global Config
no arp timeout
Global Config
clear arp-cache [gateway]
Privileged EXEC
v4.1, October 2008
is a valid
<seconds>
Routing Commands