Arp Resptime; Arp Retries; Arp Timeout - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

14.1.6 arp resptime

This command configures the ARP request response timeout. The value for
a valid positive integer, which represents the IP ARP entry response timeout time in
seconds. The range for
Default
Format
Mode
14.1.6.1 no arp resptime
This command configures the default ARP request response timeout.
Format
Mode

14.1.7 arp retries

This command configures the ARP count of maximum request for retries. The value for
is an integer, which represents the maximum number of request for retries. The
<retries>
range for
<retries>
Default
Format
Mode
14.1.7.1 no arp retries
This command configures the default ARP count of maximum request for retries.
Format
Mode

14.1.8 arp timeout

This command configures the ARP entry ageout time. The value for
positive integer, which represents the IP ARP entry ageout time in seconds. The range for
is between 15-21600 seconds.
<seconds>
Default
Format
Mode
14-4
is between 1-10 seconds.
<seconds>
l
arp resptime <1-10>
Global Config
no arp resptime
Global Config
is an integer between 0-10 retries.
4
arp retries <0-10>
Global Config
no arp retries
Global Config
1200
arp timeout <15-21600>
Global Config
v1.0, March 2006
is
<seconds>
is a valid
<seconds>
Routing Commands