Arp Retries; Arp Timeout - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
14.1.6.1 no arp resptime
This command configures the default ARP request response timeout.
Format
Mode

14.1.7 arp retries

This command configures the ARP count of maximum request for retries. The value for
is an integer, which represents the maximum number of request for retries. The
<retries>
range for
<retries>
Default
Format
Mode
14.1.7.1 no arp retries
This command configures the default ARP count of maximum request for retries.
Format
Mode

14.1.8 arp timeout

This command configures the ARP entry ageout time. The value for
positive integer, which represents the IP ARP entry ageout time in seconds. The range for
is between 15-21600 seconds.
<seconds>
Default
Format
Mode
14.1.8.1 no arp timeout
This command configures the default ARP entry ageout time.
Format
Mode
Routing Commands
no arp resptime
Global Config
is an integer between 0-10 retries.
4
arp retries <0-10>
Global Config
no arp retries
Global Config
1200
arp timeout <15-21600>
Global Config
no arp timeout
Global Config
v1.0, December 2005
is a valid
<seconds>
14-5