Ip Isis Level Psnp-Auth - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

ip isis level psnp-auth

Enables or disables PSNP authentication for specific IS-IS levels.
ip isis level {1 | 2} psnp-auth
no ip isis level {1 | 2} psnp-auth
Syntax Definitions
1
2
Defaults
PSNP authentication check for specific IS-IS levels is enabled by default.
Platforms Supported
OmniSwitch 6850, 6850E, 9000E
Usage Guidelines
•
Use the no form of this command to prevent the authentication of PSNPs at the specified IS-IS level.
•
This command overrides the global configuration of IS-IS PSNP authentication.
Examples
-> ip isis level 1 psnp-auth
-> no ip isis level 1 psnp-auth
Release History
Release 6.2.1; command was introduced.
Related Commands
ip isis psnp-auth
show ip isis status
MIB Objects
vRtrIsisLevelTable
vRtrIsisLevelPsnpAuthentication
page 24-32
Specifies the IS-IS level as Level-1.
Specifies the IS-IS level as Level-2.
Enables or disables the authentication of PSNPs.
Displays the IS-IS status.
OmniSwitch CLI Reference Guide
IS-IS Commands
June 2012