ip ospf interface priority
Configures the OSPF interface priority. The priority number helps determine the eligibility of this router to
become the designated router on the network.
ip ospf interface {interface_name} priority priority
Syntax Definitions
interface_name
priority
Defaults
parameter
priority
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
When two routers attached to a network both attempt to become the designated router, the one with the
highest priority becomes the designated router. A router whose router priority is set to 0 is ineligible to
become the designated router.
Examples
-> ip ospf interface vlan-101 priority 100
Release History
Release 6.1; command was introduced.
Release 6.2.1; ip_address parameter deprecated.
Related Commands
show ip ospf interface
MIB Objects
ospfIfTable
ospfIfRtrPriority
page 22-42
The name of the interface.
The interface priority. The valid range is 0–255.
default
1
Displays the status and statistics of an OSPF interface.
OmniSwitch CLI Reference Guide
OSPF Commands
June 2012