Ip Isis Summary-Address - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

IS-IS Commands

ip isis summary-address

Adds or deletes the summary address.
ip isis summary-address {ip-prefix/mask | ip-prefix [/netmask]} {level-1 | level-2 | level-1/2}
no ip isis summary-address {ip-prefix/mask | ip-prefix [/netmask]}
Syntax Definitions
ip-prefix/mask
ip-prefix
/netmask
level-1
level-2
level-1/2
Defaults
parameter
level-1 | level-2 | level-1/2
Platforms Supported
OmniSwitch 6850, 6850E, 9000E
Usage Guidelines
•
Use the no form of this command to remove an already configured summary address.
•
Native IS-IS routes can only be summarized into Level-2 from the Level-1 database.
•
It is not possible to summarize IS-IS internal routes at Level-1, although it is possible to summarize
external (redistributed) routes at Level-1.
•
IS-IS routes are not summarised by default.
Examples
-> ip isis summary-address 10.0.0.0/8 level-2
-> no ip isis summary-address 10.0.0.0/8
Release History
Release 6.2.1; command was introduced.
Release 6.3.1; level-1/2 parameter was added, netmask parameter is optional.
OmniSwitch CLI Reference Guide
Specifies the IP prefix in dotted decimal notation and the mask length.
Specifies the IP prefix in dotted decimal notation.
Specifies the subnet mask in dotted decimal notation.
Specifies the IS-IS level as Level-1.
Specifies the IS-IS level as Level-2.
Specifies the IS-IS level as Level-1/2.
default
level-1/2
June 2012 page 24-19