Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 1372

output definitions (continued)
# of Init State Neighbors
# of 2-Way State Neighbors
# of Exchange State Neighbors The number of OSPF neighbors in the exchange state.
# of Full State Neighbors
BFD Status
DR-Only Option for BFD
Release History
Release 6.1; command was introduced.
Release 6.2.1; ip_address parameter deprecated.
Related Commands
ip ospf interface
ip ospf interface auth-key
ip ospf interface dead-interval
ip ospf interface hello-interval
ip ospf interface md5
ip ospf interface md5 key
ip ospf interface cost
ip ospf interface poll-interval
ip ospf interface priority
ip ospf interface retrans-
interval
ip ospf interface transit-delay
ip ospf interface auth-type
ip ospf interface area
ip ospf interface type
ip ospf interface status
page 22-84
The number of OSPF neighbors in the initialization state.
The number of OSPF 2-way state neighbors on this interface.
The number of OSPF neighbors in the full state. The full state is a
neighbor that is recognized and passing data between itself and the
interface.
The status of BFD on this interface.
The BFD setting for this interface. If DR-Only only is disabled then the
setting is All Neighbors.
Creates and deletes an OSPF interface.
Configures an OSPF authentication key for simple authentication
on an interface.
Configures the OSPF interface dead interval.
Configures the OSPF interface hello interval.
Creates and deletes the OSPF interface MD5 key identification
number.
Configures the OSPF key string.
Configures the OSPF interface cost.
Configures the OSPF poll interval for a Non Broadcast Multi
Access (NBMA) interface.
Configures the OSPF interface priority.
Configures the OSPF interface retransmit interval.
Configures the OSPF interface transit delay.
Sets the OSPF interface authentication type.
Configures an OSPF interface area.
Configures the OSPF interface type.
Enables or disables the administration status on an OSPF interface.
OmniSwitch CLI Reference Guide
OSPF Commands
June 2012