Show Ip Ospf Interface - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show ip ospf interface

Displays OSPF interface information.
show ip ospf interface [interface_name]
Syntax Definitions
interface_name
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
Not specifying an interface name displays all known interfaces for the OSPF router.
Examples
No interface name is specified:
-> show ip ospf interface
Interface
Name
---------------------+----------------+----------------+--------+------+-------
vlan-213
vlan-215
output definitions
Interface Name
DR Address
Backup DR Address
Vlan
Admin Status
Oper Status
State
page 22-80
The name of the interface.
DR
Address
213.10.10.1 213.10.10.254
215.10.10.254 215.10.10.1
The name of the interface.
The designated router IP address on this network segment. Make sure
you configure a VLAN for the router IP. (See
agement Commands,"
The IP address of the backup designated router.
The VLAN to which the interface is assigned.
The current administration status of the interface, either enabled or
disabled.
Whether the interface is an active OSPF interface.
The current state of the OSPF interface. It will be down, up, dp, dr, or
other.
Backup DR Admin
Address Status
enabled
enabled
for more information.)
OmniSwitch CLI Reference Guide
OSPF Commands
Oper
Status State
up DR
up BDR
Chapter 5, "VLAN Man-
June 2012