Show Ip Ospf Area Stub - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show ip ospf area stub

Displays stub default area metrics, if configured.
show ip ospf area area_id stub
Syntax Definitions
area_id
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
N/A
Examples
-> show ip ospf area 0.0.0.1 stub
Area Id
---------------+-------+----------+------------
0.0.0.1
output definitions
Area Id
TOS
Metric
MetricType
Release History
Release 6.1; command was introduced.
Related Commands
ip ospf area
page 22-78
A unique 32-bit value in IP address format.
TOS Metric MetricType
1 1
The identification number of the stub area.
The Type of Service assignment.
The metric assignment of the default router in the stub area.
The metric type of the stub area. It will be either ospf, type1, or type2.
Creates or deletes an OSPF area.
ospf
OmniSwitch CLI Reference Guide
OSPF Commands
June 2012