Show Ip Ospf Routes - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show ip ospf routes

Displays the OSPF routes known to the router.
show ip ospf routes [ip_addr mask tos gateway]
Syntax Definitions
ip_addr
mask
tos
gateway
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
If no variables are entered, all routes are displayed. If the variables are entered, then only routes matching
the specified criteria are shown. All the variables described above must be entered for a route match. If all
of the variables are not entered, an error message is returned.
Examples
-> show ip ospf routes
Destination/Mask
---------------------+-----------------+--------+------+----------
198.168.100.100
output definitions
Destination/Mask
Gateway
Metric
Vlan
Type
Release History
Release 6.1; command was introduced.
page 22-66
The 32-bit IP address of the route destination in dotted decimal format.
The IP subnet mask of the route destination.
The Type of Service of the route.
The next hop IP address for this router.
Gateway Metric
195.5.2.8 0
The destination address of the route. This can also display the destina-
tion IP address mask if it is known.
The gateway address of the route.
The cost of the route.
The VLAN number on which the gateway can be routed.
The type of OSPF route.
Vlan Type
5 AS-Ext
OmniSwitch CLI Reference Guide
OSPF Commands
June 2012