Ip Ospf Restart-Support - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

OSPF Commands

ip ospf restart-support

Configures support for the graceful restart feature on an OSPF router.
ip ospf restart-support {planned-unplanned | planned-only}
no ip ospf restart-support
Syntax Definitions
planned-unplanned
planned-only
Defaults
Graceful restart is disabled by default.
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
Use the no form of the command to disable support for the graceful restart feature on an OSPF router.
•
The minimum hardware configuration for this command is a redundant CMM configuration. This
command is not supported on OmniSwitch chassis-based switches with a single CMM or OmniSwitch
stackable switches in a standalone configuration.
•
On OmniSwitch 6850 Series switches, a graceful restart is supported only on active ports (i.e., inter-
faces) that are on the secondary or idle modules in a stack during a takeover. It is not supported on
ports on a primary switch in a stack.
Examples
-> ip ospf restart-support planned-unplanned
-> no ip ospf restart-support
Release History
Release 6.1; command was introduced.
Related Commands
show ip ospf restart
MIB Objects
alaProtocolOspf
alaOspfRestartSupport
OmniSwitch CLI Reference Guide
Specifies support for planned and unplanned restarts.
This parameter is currently not supported.
Displays the OSPF graceful restart related configuration and status.
June 2012 page 22-45