OSPF Commands
ip ospf interface status
Enables or disables the administrative status on an OSPF interface.
ip ospf interface {interface_name} status {enable | disable}
no ip ospf interface {interface_name} status {enable | disable}
Syntax Definitions
interface_name
enable
disable
Defaults
parameter
enable | disable
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
Use the no form of the command to delete an OSPF interface.
•
The OSPF interface must be enabled for it to participate in the OSPF protocol.
Examples
-> ip ospf interface vlan-101 status enable
-> ip ospf interface vlan-101 status disable
-> no ip ospf interface vlan-101 status enable
-> no ip ospf interface vlan-101 status disable
Release History
Release 6.1; command was introduced.
Release 6.2.1; ip_address parameter deprecated.
Related Commands
show ip ospf interface
MIB Objects
ospfIfTable
ospfIfAdminStat
OmniSwitch CLI Reference Guide
The name of the interface.
Enables the OSPF interface.
Disables the OSPF interface.
default
disable
Displays the status and statistics of an OSPF interface.
June 2012
page 22-27