Ip Ospf Restart-Interval - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

ip ospf restart-interval

Configures the grace period for achieving a graceful OSPF restart.
ip ospf restart-interval [seconds]
Syntax Definitions
seconds
Defaults
parameter
seconds
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
The minimum hardware configuration for this command is a redundant CMM configuration. This
command is not supported on OmniSwitch chassis-based switches with a single CMM or OmniSwitch
stackable switches in a standalone configuration.
•
On OmniSwitch 6850 switches, a graceful restart is supported only on active ports (i.e., interfaces) that
are on the secondary or idle modules in a stack during a takeover. It is not supported on ports on a
primary switch in a stack.
Example
-> ip ospf restart-interval 600
Release History
Release 6.1; command was introduced.
Related Commands
ip ospf restart-support
show ip ospf restart
MIB Objects
alaProtocolOspf
alaOspfRestartInterval
page 22-46
The hitless restart timeout interval, in seconds. The valid range is
0–1800.
default
120
Administratively enables and disables support for the graceful
restart feature on an OSPF router.
Displays the OSPF graceful restart related configuration and status.
OmniSwitch CLI Reference Guide
OSPF Commands
June 2012