Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 1457

IS-IS Commands
output definitions
Host-name
Adjacencies
-> show ip isis adjacency detail
=========================================================================
ISIS adjacency
=========================================================================
-------------------------------------------------------------------------
SystemID : 1720.2116.0051
Interface : vlan2
State : UP
Nbr Sys Type : L2
Hold Time : 6
Adj Level : L2
IPv4 Neighbor
Restart Support
Restart Status
Restart Suppressed : Disabled
-------------------------------------------------------------------------
SystemID : 172.2116.0052
Interface : vlan2
State : UP
Nbr Sys Type : L1
Hold Time : 6
Neighbor : 2.2.2.3
Restart Support
Restart Status
Restart Suppressed
-------------------------------------------------------------------------
Adjacency : 2
=========================================================================
output definitions
SystemID
Interface
State
Adj Level
Nbr Sys Type
Hold Time
IPv4 Neighbor
Restart Support
Restart Status
Restart Suppressed
SNPA
Up Time
OmniSwitch CLI Reference Guide
The hostname of the adjacent router.
The total number of adjacent routers.
SNPA
Up Time
Priority
L.CircType : L1L2
Max Hold
Host-name
: 2.2.2.3
: Disabled
: Not currently being helped
SNPA
Up Time
Priority
L.CircType : L1L2
Max Hold
: Disabled
: Not currently being helped
: Disabled
The system ID of the adjacent router. The system ID is a fixed size, six
octet field in the NSAP. In an IS-IS routing domain, each router is iden-
tified by a 6-octet hexadecimal system ID.
The interface name of the adjacent router.
The state of the adjacent router (Up or Down).
The adjacency level (L1 or L2) of the router.
The type of the neighboring router(L1, L2 or L1L2)
The Hold time of the adjacent router.
The 32-bit IP address of the neighbor.
Indicates if graceful restart is enabled or disabled.
Indicates whether the router is currently helping an adjacent router to
restart.
Indicates whether the advertisement of LSPs are suppressed
( ) or not (
enabled
The SNPA address of the adjacent router.
Indicates the time period in seconds, during which the router was in the
adjacency.
June 2012
: 00:d0:95:f3:0f:08
: SUN OCT 01 05:18:51 2006
: 64
: 9
: kite-2
: 00:d0:95:f3:0f:08
: SUN OCT 01 05:18:51 2006
: 64
: 9Adj Level
) as per the request of adjacent router.
disabled
: L2IPv4
page 24-35