Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 1375

OSPF Commands
output definitions (continued)
Last Restart Exit Reason
Restart Helper Support
Restart Helper Strict
Checking
Restart Helper Mode
OmniSwitch CLI Reference Guide
The outcome of the last attempt at a graceful restart. If the value is
None, then no restart has yet been attempted. If the value is In
Progress, then a restart attempt is currently underway. Other possible
values include Completed (successfully completed), Timed Out
(timed out), and Topology Changed (aborted due to topology change).
The administrative status of the capability of an OSPF router to operate
in helper mode in response to a router performing a graceful restart,
which can be Enabled or Disabled. Use the
status command to modify this parameter.
The administrative status of whether or not a changed Link State
Advertisement (LSA) will result in termination of graceful restart by a
helping router, which can be Enabled or Disabled. Use the
restart-helper strict-lsa-checking status
parameter.
Whether this OSPF router is operating as a helper to a restarting router.
June 2012
ip ospf restart-helper
ip ospf
command to modify this
page 22-87