Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 1409

OSPFv3 Commands
Examples
-> show ipv6 ospf lsdb
Area
----------------+----------+------------+-----------------+----------+----------
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
output definitions
Area
Type
Link Id
Advertising Rtr
Sequence #
Age
Release History
Release 6.1.3; command was introduced.
Related Commands
ipv6 ospf status
MIB Objects
ospfv3AsLsdbTable
ospfv3AsLsdbAreaId
ospfv3AsLsdbType
ospfv3AsLsdbLsid
ospfv3AsLsdbRouterId
ospfv3AsLsdbAdvertisement
ospfv3AsLsdbSequence
ospfv3AsLsdbAge
OmniSwitch CLI Reference Guide
Type Link ID
Router 0
Router 0
Router 0
Router 0
The identification of the area to which the router belongs.
The protocol type from where the route was learned.
The Link state ID. The ID is a unique 32-bit value expressed as an IPv6
address. This number is used as a record in the link state database.
The ID of the router that advertises the routes.
The advertisement sequence number (i.e., a value used to identify old
and duplicate link state advertisements).
The age of the LSA in seconds. That is, the duration for which this
entry has existed in the external database.
Displays the OSPFv3 status and general configuration parameters.
June 2012
Advertising Rtr Sequence #
8000020f
1.1.1.1
80000208
3.3.3.3
800001f1
5.5.5.5
800000da
30.30.30.30
Age
1117
1121
1117
1115
page 23-33