Timer; Summary - 3Com 8807 Command Reference Manual

544 C 27: BGP C C
HAPTER ONFIGURATION OMMANDS
Description
Use the reset dampening command to reset route attenuation information and
release suppressed routes.
Related command: dampening, display bgp routing-table dampened.
Example
# Reset the route attenuation information of the specified route 20.1.0.0, and
release the suppression of a suppressed route.
<SW8800> reset dampening 20.1.0.0 255.255.0.0

summary

Syntax
summary
undo summary
View
BGP view
Parameter
None
Description
Use the summary command to configure auto aggregation of sub-network
routes.
Use the undo summary command to disable auto aggregation of sub-network
routes.
By default, no auto aggregation of sub-network routes is executed.
After the summary is configured, BGP cannot receive the sub-network routes
imported from the IGP, so the amount of the routing information can be reduced.
Example
# Make the auto aggregation of the sub-network routes.
[3Com-bgp] summary

timer

Syntax
timer keep-alive keepalive-interval hold holdtime-interval
undo timer
View
BGP view
Parameter
keepalive-interval: Sets the interval time value for keepalive time which ranges
from 1 to 65535. By default, its value is 60 seconds.