Display Gvrp Status - 3Com 8807 Command Reference Manual

display gvrp status

interface-type interface-number] }&<1-10>. interface-type is interface type, and
interface-number is interface number. The interface-number after the keyword to
must be larger than or equal to that before to. &<1-10> means that the preceding
parameter can be repeated up to 10 times.
Description
Use the display gvrp statistics command to view the GVRP statistics information
of all the Trunk ports, including GVRP status information, failed GVRP registration
entries and the last GVRP data unit origin.
Example
# Display the GVRP statistics information on Ethernet2/1/1.
<SW8800> display gvrp statistics interface ethernet2/1/1
GVRP statistics on port Ethernet2/1/1
GVRP Status
GVRP Failed Registrations
GVRP Last Pdu Origin
GVRP Registration Type
Table 18 Description on the fields of the display gvrp statistics command
Field
GVRP Status
GVRP Failed Registrations
GVRP Last Pdu Origin
GVRP Registration Type
Syntax
display gvrp status
View
Any view
Parameter
None
Description
Use the display gvrp status command to view the global GVRP status
information.
Example
# Display the global status information about GVRP.
<SW8800> display gvrp status
GVRP is enabled
The above information means that the global GVRP is enabled.
GVRP Configuration Commands
Description
GVRP status, that is, enabled or disabled
Failed GVRP registration entries
The source of the last GVRP data unit. If GVRP data unit is not
received, the system displays 0000-0000-0000; if received
from a device, the GVRP data unit received last time is
regarded as coming from this MAC address of this device.
GVRP registration type, that is, fixed, forbidden or normal
125
: Enabled
: 0
: 0000-0000-0000
: Normal