Arp Max-Aggregation-Entry; Arp Max-Entry - 3Com 8807 Command Reference Manual

46
ARP Table Size
Configuration
Commands

arp max-entry

max-aggregation-entry
ARP T
ABLE
C
OMMANDS
Syntax
arp max-entry slot-num max-num
undo arp max-entry slot-num
View
System view
Parameter
slot-num: Slot number of the card.
max-num: Maximum number of ARP entries that can be supported by the
specified card. This argument counts in K (1K = 1024) and ranges from 4K to 8K.
Description
Use the arp max-entry command to configure the maximum number of ARP
entries that can be supported by a specified card in the system.
Use the undo arp max-entry command to cancel the configuration.
By default, each card supports up to 4K ARP entries.
You can configure the maximum number of ARP entries to be 4K, 5K, 6K, 7K or
8K modules 3C17525, 3C1757, 3C17530, and 3C17531. For all other modules,
the maximum number of ARP entries is 4K.
Example
# Configure the maximum number of ARP entries that can be supported by the
interface card in slot 12 to 8K.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800]arp max-entry 12 8
The configuration won't be enabled until the system is rebooted.
arp Syntax
arp max-aggregation-entry max-aggnum
S C
IZE ONFIGURATION