Snmp-Agent Trap Enable Ospf - 3Com 8807 Command Reference Manual

Hide thumbs Also See for 8807:

Table of Contents

ONFIGURATION

Use the sham-link command to run Fast Hello function on the sham-link link, that

is, to specify multiple Fast Hello packets to be sent within one second. The default

dead interval time is one second.

# Specify the sham-link link 1.1.1.1 2.2.2.2 to run Fast Hello Function. The dead

interval time is one second. Five Hello packets are sent within one second.

[3Com-ospf-1] area 0.0.0.0

[3Com-ospf-1-area-0.0.0.0] sham-link 1.1.1.1 2.2.2.2 dead minimal

multi-hello 5

snmp-agent trap enable

snmp-agent trap enable ospf [ process-id ] [ ifstatechange | virifstatechange

originatelsa | maxagelsa | lsdboverflow | lsdbapproachoverflow ]

undo snmp-agent trap enable ospf [ process-id ] [ ifstatechange |

virifstatechange | nbrstatechange | virnbrstatechange | ifcfgerror |

lsdbapproachoverflow ]

process-id: ID of an OSPF process. The command is applied to all current OSPF

processes if you do not specify a process ID.

ifstatechange, virifstatechange, nbrstatechange, virnbrstatechange,

ifcfgerror, virifcfgerror, ifauthfail, virifauthfail, ifrxbadpkt, virifrxbadpkt,

iftxretransmit, viriftxretransmit, originatelsa, maxagelsa, lsdboverflow,

lsdbapproachoverflow: Types of TRAP packets that the switch produces in case

of OSPF anomalies.

Use the snmp-agent trap enable ospf command to enable the OSPF TRAP

function. Use the undo snmp-agent trap enable ospf command to disable the

OSPF TRAP function.

This command cannot be applied to the OSPF processes that are started after the

command is executed.

By default, the switch does not send TRAP packets in case of OSPF anomalies.

For detailed configuration of SNMP TRAP, refer to the module "System

Management" in this manual.

Show Quick Links

Table of Contents