3Com 8807 Command Reference Manual page 1006

1004 C 60: I
HAPTER NFORMATION
C
ENTER
Description
Use the display info-center command to view the configuration of system log
and the information recorded in the memory buffer.
If the information in the current log/trap buffer is less than the size of buffer,
display the actual log/trap information.
Related command: info-center enable,info-center loghost,info-center
logbuffer,info-center console channel,info-center monitor channel.
Example
# Show the system log information.
<SW8800> display info-center
Information Center:enabled
Log host:
Console:
channel number:0, channel name:console
Monitor:
channel number:1, channel name:monitor
SNMP Agent:
channel number:5, channel name:snmpagent
Log buffer:
enabled, max buffer size:1024, current buffer size:256
current messages:6, channel number:4, channel name:logbuffer
dropped messages:0, overwrote messages:0
Trap buffer:
enabled, max buffer size:1024, current buffer size:256
current messages:0, channel number:3, channel name:trapbuffer
dropped messages:0, overwrote messages:0
Log file :
enabled,max file buffer size 32KB, current file buffer size 7KB,
channel number : 6, channel name : logfile
max log file number : 5, max length of each log file : 2MB
log file directory : cf:/logfile
Information timestamp setting:
log - date, trap - date, debug - boot
Table 140 Description on the fields of the display info-center command
Field
Information Center:
Log host:
Console:
Monitor:
SNMP Agent:
Log buffer:
Trap buffer:
Description
The status of the information center
The status of the log host, including its IP address, occupied
channel number, channel name, language and the priority level
of the log host.
The status of the console port, including the occupied channel
name and channel number.
The status of the monitoring port, including the occupied
channel number and channel name.
The status of the SNMP agent, including the occupied channel
number and channel name.
The status of the log buffer, including enable status, maximum
size, current size, number of current messages, channel name,
channel number, number of dropped messages, number of the
overwritten messages.
The status of the trap buffer, including enable status,
maximum size, current size, number of current messages,
channel name, channel number, number of dropped messages,
number of the overwritten messages.