Gvrp; Gvrp Registration - 3Com 8807 Command Reference Manual

126 C 9: GARP&GVRP C C
HAPTER ONFIGURATION OMMANDS

gvrp

Syntax
gvrp
undo gvrp
View
System view/Ethernet port view
Parameter
None
Description
Use the gvrp command to enable GVRP.
Use the undo gvrp command to disable GVRP.
By default, GVRP is disabled.
This command can be used to enable/disable global GVRP in system view or
enable/disable port GVRP in Ethernet port view.
Before enabling port GVRP, you must enable global GVRP first. In addition, port
GVRP must be enabled/disabled on Trunk ports.
Related command: display gvrp status.
Example
# Enable global GVRP.
[SW8800] gvrp

gvrp registration

Syntax
gvrp registration { fixed | forbidden | normal }
undo gvrp registration
View
Ethernet port view
Parameter
fixed: Enables to create or register VLAN on the port manually and disables to
register or deregister VLAN dynamically.
forbidden: Deregisters all VLANs except VLAN 1 and disables to create or register
any other VLAN on the port.
normal: Enables to create, register and deregister VLAN on the port manually or
dynamically.
Description
Use the gvrp registration command to configure GVRP registration type.