Arp Non-Flooding; Arp Proxy Enable - 3Com 8807 Command Reference Manual

45
ARP Configuration
Commands

arp non-flooding

arp proxy enable

ARP C
ONFIGURATION
Syntax
arp non-flooding enable
undo arp non-flooding enable
View
Ethernet port view
Parameter
None
Description
Use the arp non-flooding enable command to enable the feature that the ARP
packets of a port are not broadcast in the VLAN where this port lies.
Use the undo arp non-flooding command to disable this feature.
By default, ARP request packets are broadcast in the VLAN where the port lies.
Example
# Enable the feature that ARP request packets of Ethernet 2/1/1 are not broadcast
in the VLAN where Ethernet 2/1/1 lies.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] interface ethernet2/1/1
[3Com-Ethernet2/1/1] arp non-flooding enable
# Disable the feature above, namely, ARP request packets of Ethernet 2/1/1 are
broadcast in the VLAN where Ethernet 2/1/1 lies.
[3Com-Ethernet2/1/1] undo arp non-flooding
Syntax
arp proxy enable
undo arp proxy enable
C
OMMANDS