Aggregate - 3Com 8807 Command Reference Manual

MBGP Multicast
Extension
Configuration
Commands

aggregate

38
MBGP M
ULTICAST
C
ONFIGURATION
Syntax
aggregate address mask [ as-set | attribute-policy route-policy-name |
detail-suppressed | origin-policy route-policy-name | suppress-policy
route-policy-name ]*
undo aggregate address mask [ as-set | attribute-policy route-policy-name |
detail-suppressed | origin-policy route-policy-name | suppress-policy
route-policy-name ]*
View
IPv4 multicast sub-address family view
Parameter
address: Address of the aggregated route.
mask: Network mask of the aggregated route.
as-set: Generates a route with AS_SET segment. This parameter is not
recommended when aggregating many AS paths.
attribute-policy route-policy-name: Sets aggregate attribute.
detail-suppressed: Advertises the aggregated routes rather than the specific
routes.
origin-policy route-policy-name: Filters the originate routes of the aggregate.
suppress-policy route-policy-name: Does not advertise the specific routes
selected.
Description
Use the aggregate command to create a multicast aggregated record in the BGP
routing table.
MBGP Multicast Extension Configuration Commands
E
XTENSION
C
OMMANDS
655