Encapsulation; Label-Range - 3Com 8807 Command Reference Manual

Table 99 Detailed description on the fields of a VC
Field
Bandwidth
Broadcast-restrain Percentage of VSI broadcast suppression
CoS
CoS-table
Mac-table limit

encapsulation

Command
encapsulation { vlan | ethernet }
View
VSI view
Parameter
encapsulation: Specifies the VC encapsulation type of the VSI.
vlan: Sets the encapsulation type of the VC to Ethernet Tagged mode.
ethernet: Sets the encapsulation type of the VC to Ethernet Raw mode. By
default, it is in Ethernet mode.
Description
Use the encapsulation command to specify the VC encapsulation type of the VSI.
By default, the VC encapsulation type in the VSI takes this value.
Example
# Specify the encapsulation type of VSI 3Com as VLAN.
<SW8800> system-view view
[SW8800] vsi 3Com static
[3Com-vsi-3Com] encapsulation vlan

label-range

Syntax
label-range label-range-id
View
VSI view
Parameter
label-range-id: Specifies label range ID.
Description
Use the label-range command to manually configure the label range ID
corresponding to the VSI.
After label range redirection is configured, you can change the direction of VSI
flow by changing the label range corresponding to the VSI, namely, redirect the
new label range to the VPLS module for VSI flow processing so that the load on
the VPLS module is shared.
Description
VSI bandwidth limit
Class of Service
Service registration mapping table of user priority on the PSN
Limit on the number of MAC forwarding entries of the VSI
VPLS Configuration Commands 779