3Com 8807 Command Reference Manual page 385

For detailed description of the output information, see Table 48.
# Display the verbose information of the Active and Inactive routes that are filtered
through basic acl 2000.
<SW8800> display ip routing-table acl 2000 verbose
Routes matched by access-list 2000:
+ = Active Route, - = Last Active, # = Both
Summary count: 2
**Destination: 10.1.1.0
Protocol: #DIRECT
*NextHop: 10.1.1.2
Vlinkindex: 0
State: <Int ActiveU Retain Unicast>
Age: 7:24
**Destination: 10.1.1.2
Protocol: #DIRECT
*NextHop: 127.0.0.1
Vlinkindex: 0
State: <NoAdvise Int ActiveU Retain Gateway Unicast>
Age: 7:24
Table 49 Description of the fields of the display ip routing-table acl verbose command
Field
Destination Destination address
Mask Mask
Protocol Routing protocol
Preference Routing preference
Nexthop Next hop address
Interface Output interface, through which the data packet destined for the destination
network segment is sent
Vlinkindex Virtual link index
Display Commands of the Routing Table
Mask: 255.255.255.0
Preference: 0
Interface: 10.1.1.2(Vlan-interface1)
Cost: 0/0 Tag: 0
Mask: 255.255.255.255
Preference: 0
Interface: 127.0.0.1(InLoopBack0)
Cost: 0/0 Tag: 0
Description
383
* = Next hop in use