Sysname; System-View - 3Com 8807 Command Reference Manual

62 C 2: C U L S
HAPTER OMMANDS SED TO OG IN TO WITCH
Description
Use the stopbits command to configure the stop bits on the user interface.
Use the undo stopbits command to restore the default stop bits.
This command can only be performed in Console and AUX user interface view.
By default, the value is 1.
Note that setting 1.5 stop bits is not available on 3Com Switch 8800 Family Series
Routing Switches at present.
Example
# Set stop bits to 2.
<SW8800>system-view
System View: return to User View with Ctrl+Z.
[SW8800] user-interface aux 0
[3Com-ui-aux0] stopbits 2

sysname

Syntax
sysname text
undo sysname
View
System view
Parameter
text: Specifies the hostname with a character string, ranging from 1 to 30
characters. The default name is 3Com.
Description
Use the sysname command to configure the hostname of the switch.
Use the undo sysname command to restore the default hostname.
Changing the hostname of the switch will affect the prompt of command line
interface. For example, if the hostname of the switch is 3Com, the prompt in user
view will be <SW8800>.
Example
# Configure the hostname of switch to Switch.
<SW8800>system-view
System View: return to User View with Ctrl+Z.
[SW8800] sysname Switch
[Switch]

system-view

Syntax
system-view