Local-Server; Local-Server Nas-Ip - 3Com 8807 Command Reference Manual

336 C 21: AAA RADIUS/HWTACACS P C C
HAPTER AND ROTOCOL ONFIGURATION OMMANDS
Example
# Set the authentication/authorization key of the RADIUS scheme, 3com, to hello.
[3Com-radius-3com] key authentication hello
# Set the accounting packet key of the RADIUS scheme, 3com, to ok.
[3Com-radius-3com] key accounting ok

local-server

Syntax
local-server enable
undo local-server
View
System view
Parameter
None
Description
Use the local-server enable command to enable the local RADIUS server and
enable port 1645 and 1646. You must use this command to enable ports before
using local RADIUS servers.
Use the undo local-server command to disable the local RADIUS server. Port
1645 and port 1646 are disabled, and RADIUS servers are unavailable in this case.
By default, local RADIUS servers are enabled, and port 1645 and port 1646 are
enabled too.
Example
# Enable the local RADIUS server.
<SW8800>system-view
[SW8800]local-server enable

local-server nas-ip

Syntax
local-server nas-ip ip-address key password
undo local-server nas-ip ip-address
View
System view
Parameter
nas-ip ip-address: Sets Nas-IP address of access server. ip-address is expressed in
the format of dotted decimal. By default, there is a local server with the NAS-IP
address of 127.0.0.1.
key password: Sets password of logon user. password is a character string
containing up to 16 characters.