Display Multicast Routing-Table - 3Com 8807 Command Reference Manual

Example
# View the multicast forwarding table information.
<SW8800> display multicast forwarding-table
Multicast Forwarding Cache Table
Total 2 entries
00001. (4.4.4.4, 224.2.254.84), iif Vlan-interface1, 0 oifs
00002. (4.4.4.4, 224.2.149.17), iif Vlan-interface1, 1 oifs
Matched 2 entries
The descriptions about the displayed information are shown in Table 82.
Table 82 Description on the fields of display multicast forwarding-table
Field
Multicast Forwarding Cache Table
Total 2 entries
00002
(4.4.4.4, 224.2.149.17)
iif Vlan-interface1, 1 oifs
List of outgoing interface:
Matched 236 pkts(3267 bytes),
Wrong If 0 pkts
Forwarded 233 pkts(3267 bytes)
Matched 2 entries
display multicast Syntax
routing-table
display multicast routing-table [ group-address [ mask { mask | mask-length } ]
| source-address [ mask { mask | mask-length } ] | incoming-interface {
interface-type vlan-interface | register } ]*
View
Any view
Parameter
group-address: Multicast group address, used to specify a multicast group and
display the corresponding routing table information of the group. The value
ranges from 224.0.0.0 to 239.255.255.255.
source-address: Unicast IP address of the multicast source.
incoming-interface: Incoming interface of the multicast route entry.
Matched 240 pkts(11288 bytes), Wrong If 0 pkts
Forwarded 232 pkts(11288 bytes)
List of outgoing interface:
01: Vlan-interface2
Matched 236 pkts(3267 bytes), Wrong If 0 pkts
Forwarded 233 pkts(3267 bytes)
01: Vlan-interface2
Multicast Common Configuration Commands
Description
Multicast forwarding cache table
Total number of entries
Sequence number of entries
(s,g), source IP address and multicast group
Multicast forwarding cache table has an incoming
interface Vlan-interface 1 and one outgoing interface
List of outgoing interface has an outgoing interface
Vlan-interface 2
236 matched packets (3267 bytes); 0 matched packets
means wrong; 233 forwarded packets (3267 bytes)
2 matched entries
589