Ssh Server Authentication-Retries; Ssh Server Compatible_Ssh1X Enable - 3Com 8807 Command Reference Manual

952 C 56: SSH T
HAPTER ERMINAL
ssh server
authentication-retries
ssh server
compatible_ssh1x
enable
S C C
ERVICE ONFIGURATION OMMANDS
Performing this command, you can enter the public key view. Then you can use
the public-key-code begin command to configure the client public key on the
server. The client public key is generated randomly by the SSH 2.0-enabled client
software.
Related command: public-key-code begin, public-key-code end.
Example
# Enter the public key view named sw8800002.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] rsa peer-public-key sw8800002
[3Com-rsa-public-key]
Syntax
ssh server authentication-retries times
undo ssh server authentication-retries
View
System view
Parameter
times: Number of authentication retries, in the range from 1 to 5. By default, the
value is 3.
Description
Use the ssh server authentication-retries command to set the number of SSH
connection authentication retries.
Use the ssh server authentication-retries command to restore the default
number of SSH connection authentication retries.
Related command: display ssh server.
Example
# Specify the number of login authentication retries as 4.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] ssh server authentication-retries 4
Syntax

ssh server compatible_ssh1x enable

undo ssh server compatible_ssh1x
View
System view