Display Vrrp Statistics - 3Com 8807 Command Reference Manual

display vrrp statistics

Parameter
None
Description
Use the display vrrp ifm command to display the configuration information of
the VRRP-enabled IFM device.
Example
# Display the configuration information of the VRRP-enabled IFM device.
<SW8800> display vrrp ifm
Interface
VRID
Track IFM increased value
IFM Connecting Status
CPU ID State
========== ================
1 Master
2 Backup
Syntax
display vrrp statistics [ vlan-interface interface-number [ virtual-router-ID ] ]
View
Any view
Parameter
vlan-interface interface-number: Specifies the name of the VLAN interface to
which the virtual router belongs.
virtual-router-ID: VRRP virtual router ID, ranging from 1 to 255.
Description
Use the display vrrp statistics command to view the information about the VRRP
statistics.
If the interface name and virtual router ID are not specified, the statistics
information about all the virtual routers on the switch will be displayed. If only the
interface name is specified, the statistics information about all the virtual routers
on the interface will be displayed. If the interface name and virtual router ID are
specified, the statistics information about the specified virtual router on the
interface will be displayed.
Example
# Display the VRRP statistics information on VLAN-interface 2.
<SW8800> display vrrp statistics vlan-interface 2
Interface
VRID
CheckSum Errors
VRID Errors
IP TTL Errors
Invalid Auth Type
Packet Length Errors
VRRP Configuration Commands
: Vlan-interface1000
: 1
: 20
:
: Vlan-interface2
: 1
: 0 Version Errors
: 0 Advertisement Interval Errors
: 0 Auth Failures
: 0 Auth Type Mismatch
: 0 Address List Errors
791
: 0
: 0
: 0
: 0
: 0