Tftp Get - 3Com 8807 Command Reference Manual

TFTP Configuration
Commands

tftp get

View
FTP Client view
Parameter
None
Description
Use the verbose command to enable the client to display the commands received
from/sent to the server.
Use the undo verbose command to disable the client from display the commands
received from/sent to the server
By default, the VERBOSE is enabled and the client displays the commands received
from/sent to the server.
Example
# Enable VERBOSE.
<SW8800> ftp
[ftp]verbose
Syntax
tftp tftp-server get source-file [ dest-file ]
View
User view
Parameter
tftp-server: IP address or hostname of the TFTP server. The name of the TFTP server
should be a string ranging from 1 to 20 characters.
source-file: Filename of the source file on the TFTP server.
dest-file: Filename of the destination file which will be saved on the switch.
Description
Use the tftp get command to download a file from the specified directory of the
TFTP server and saving it on the switch.
Related command: tftp put.
Example
# Download the file LANSwitch.app from the TFTP server at 1.1.3.214 and save it
as vxWorks.app on the local switch.
<SW8800> tftp 1.1.3.214 get LANSwitch.app vxWorks.app
TFTP Configuration Commands 1001