Display Mirroring-Group; Display Qos Conform-Level - 3Com 8807 Command Reference Manual

234 C 17: Q S C
HAPTER O OMMANDS
Description
Use the display port-group index command to display the configuration
information of the designated port group, including the description and member
information of the port group.
Related command: port
Example
# Display the configured information of port group 1.
<SW8800> display port-group 1
Port-group ID : 1
Description: Port group 01
Port-group is unlocked.
Port(s) description:
Ethernet3/1/1 Ethernet3/1/2 Ethernet3/1/3

display mirroring-group

Syntax
display mirroring-group [ groupid ]
View
Any view
Parameter
groupid: mirroring group ID, in the range of 1 to 24.
Description
Use the display mirroring-group command to view the configuration of a port
mirroring group. The information displayed includes the monitored ports, direction
of monitored packets, monitoring ports, etc.
Related command: mirroring-group.
Example
# Display the parameter configuration of a port mirroring group.
<SW8800> display mirroring-group
mirroring-group 1 inbound Ethernet6/1/1 mirrored-to Ethernet6/1/2
display qos Syntax
conform-level
display qos conform-level [ conform-level-value ] { dscp-policed-service-map [
dscp-list ] | exp-policed-service-map | local-precedence-cos-map }
View
Any view
Parameter
conform-level-value: Conform level, in the range of 0 to 2. If you type value(s) for
this parameter, then only the specified conform-level DSCP items will be displayed.
Otherwise, the system displays the whole mapping connection.