408
C
24: RIP C
C
HAPTER
ONFIGURATION
OMMANDS
[SW8800] interface Vlan-interface 10
[3Com-Vlan-interface10] rip metricout 2
rip output
Syntax
rip output
undo rip output
View
Interface view
Parameter
None
Description
Use the rip output command to allow an interface to transmit RIP packets to the
external.
Use the undo rip output command to disable an interface to transmit RIP packets
to the external.
By default, all interfaces except loopback interfaces are enabled to transmit RIP
packets to the external.
This command is used in cooperation with the other two commands: rip input
and rip work. Functionally, rip work is equivalent to rip input & rip output. The
latter two control the receipt and the transmission of RIP packets respectively on
an interface. The former command equals the functional combination of the latter
two commands.
Related command: rip input, rip work.
Example
# Disable the interface Vlan-interface 10 to transmit RIP packets.
[SW8800] interface Vlan-interface 10
[3Com-Vlan-interface10] undo rip output
rip split-horizon
Syntax
rip split-horizon
undo rip split-horizon
View
Interface view
Parameter
None
Description
Use the rip split-horizon command to configure an interface to use split horizon
when transmitting RIP packets.